The use and characteristics of insulating rubber mat
Insulating rubber mats are a safety mat designed to prevent electrical accidents, primarily used to ensure the safety of personnel working in high-voltage places such as power plants, substations, and laboratories. This kind of floor mat is made of natural rubber and synthetic rubber, which is tough and has good skid resistance, thus protecting the staff from electric shock.
In addition, insulating rubber mats have the characteristics of high-voltage insulation, corrosion resistance, oil resistance, high temperature resistance, fire resistance, wear resistance, crack resistance, and aging resistance. They are suitable for outdoor and indoor use, and perform best in terms of wear resistance and high temperature resistance.
Categories and standards of insulating rubber mat
According to different needs, insulating rubber mats can be divided into two types: isolation type and counterattack type. Isolated insulated rubber floor mats have a low surface temperature and are not suitable for prolonged contact, but are suitable for use in locations with voltages higher than 1 kV. The reaction type has a relatively high surface temperature and is suitable for use in locations with voltages less than 1 kV.
The international standards for insulating rubber floor mats mainly include EN, IEC, and ASTM. In China, there is a set of national standards for the production, testing, and installation of insulating rubber floor mats, namely GB / T 17632-1998 Insulating Rubber Floor Mat. This standard specifies the material, structure, and performance of floor mats, which can serve as a legal basis for purchasing and using them.
Selection of insulating rubber mat
When purchasing insulating rubber mats, it is important to note the following points:
1. When selecting materials, attention should be paid to the quality and performance of the materials. Mat produced by professionally certified manufacturers should be selected;
2. Before use, the floor mat should be tested to ensure that its insulation performance meets the standard requirements;
3. Different specifications and models should be selected according to actual needs to ensure the service life and performance of the floor mat.
The use of insulating rubber mat
When using insulating rubber mats, it is necessary to pay attention to the following points:
Before using, it is important to check whether the surface of the mat is flat, free of damage, and closely fitted to the ground to prevent people from slipping;
2. During use, avoid placing sharp metal objects or heavy objects on the mat to avoid damaging it;
3. After use, it is necessary to promptly clean the debris and dirt on the surface of the mat to keep it clean.
Maintenance of insulating rubber mat
To extend the service life of insulating rubber mats and enhance their maintenance effectiveness, proper maintenance and care is required.
Specific measures include:
1. Avoid contact with acid and alkali substances during use;
2. Do not scrape the surface of the mat with hard objects;
3. Do not place heavy objects or rollers on the surface of the mat;
4. When using the mat, avoid sharp metal objects and objects on the surface of the mat to avoid damaging it;
5. When not in use, it should be promptly put away and stored in a dry, ventilated, shaded, and protected from moisture and high temperatures.
Summary:
As an important safety measure to prevent electrical accidents, the selection, use, and maintenance of insulating rubber mats need to strictly comply with domestic and international standards and regulations. Only by ensuring its quality and performance can the health and safety of workers be guaranteed in high-pressure environments. I hope this article will be helpful for you to understand the insulation rubber mat.
Post time: Aug-24-2023